Zonda UPS

Double conversion online with three-phase output

This online series is an uninterrupted power supply (UPS) incorporating dual conversion technology. It provides perfect protection specifically for computer equipment, computerized instrument communication systems. Its true dual-conversion online design eliminates all disruptions to the AC power supply.

A rectifier converts the alternating current from the power of the utility to direct current. This DC current charges the batteries and feeds the inverter. On the basis of this DC voltage, the inverter generates a pure sine-wave AC voltage, which constantly feeds the loads. Computers and peripherals are therefore fully powered by the inverter. In the event of a power outage, the maintenance-free batteries supply the inverter.

All IPOWER of the ZONDA series are designed to ADAP an isolating transformer for a better and higher level of protection, both "IN" and "OUT".


Use cases

Ideal for:

  • Networking environments
  • Data centers
  • Automation server and workstation
  • Banking institutions
  • Household
  • Industrial environments
  • Textile
  • Hotel
  • Communication systems


With the help of its design, the IPOWER ZONDA series offers a high level of protection with fewer batteries to reduce its installation area and installation costs. Thanks to its high-frequency, dual-conversion technology, the Zonda features:

  • High frequency on-line dual conversion technology
  • Fully computerized technology
  • Power factor of 0.9Wide input voltage range
  • Continuous voltage variableCarte smart RS232/SNMP (optional) RS485/relay card (optional)
  • Increase and decrease voltage to protect against overloads and spikes
  • Cold start
  • 1050 j protected against surge and lightning



POOIP1802 - Zonda 15 KVA TM sans cabines sans batteries

1 pcs / carton
43.60 kg
71.0 x 46.0 x 95.0 cm cm

POOIP1801 - Zonda 20 KVA TM sans cabines sans batteries

1 pcs / carton
48.00 kg
63.5 x 35.0 x 69.5 cm cm

POOIP1803 - Zonda 15 KVA TM avec cabine et batteries

POOIP1804 - Zonda 20 KVA TM avec cabine et batteries


Generation Zonda
Tower model 0.9PF 15K 20K
CAPACITY(VA/W) 15kVA/12kW 20kVA/16kW
Voltage Range 208~478Vac
Frequency Range 45Hz-55Hz @ 50Hz  , 54Hz - 66Hz @ 60Hz, Auto Sensing for 50/60Hz UTILITY
Phase Three Phase + Neutral + Ground
Power Factor >=0.99
Generator Input Support
Voltage  220Vac/230Vac/ 240Vac  could be set by LCD and RS232, USB
Power Factor 0.8、0.9(optional)
Voltage Regulation ±1%
Frequency Range  Sychronized Range 45-55Hz ±0.02Hz@ 50Hz, 54-66Hz ±0.02Hz@60Hz
Battery Mode & None Sychronized Range  50/60Hz±0.02Hz
Current Crest Ratio 3:1
Harmonic Distortion <=2% THD(Linear Load)
<=5% THD(Non-Linear Load)
Output Waveform Pure Sinewave
Overload Capacity Line Mode

Load≤110%: last 60min,≤125%: last 10min,≤150%: last 1min
≥150% shut down UPS immediately

Battery Mode

Load≤110%: last 10min,≤125%: last 1min,≤150%: last 5S
≥150% shut down UPS immediately

Transfer Time AC to DC Zero
Inverter to Bypass Zero
Economic Mode(ECO Mode)  support
Frequency converter Mode(Converter Mode) support(optional)
Bypass output when UPS off Support
AC Mode 91%
Battery Mode 88%

cut off voltage can be set(1.75-1.80/cell);  
boost voltage can be set(2.3-2.35V/cell)

Charging current (A)(max.) 6
Charging voltage(VDC)

±108/121.5/135 can be set from 2.2V to 2.29V per cell, 
float voltage  2.25V/cell default

LCD + LED Load/Battery/Input/Output/Operating Mode Information
Battery Mode Sounding every 2 seconds 
Low Battery Sounding every second
Overload Sounding  every second
Bypass   Sounding every 2 minutes
Fault Continuously Sounding
Dimension(D*W*H)mm 502*250*616
Net Weight(kg) 45 45
Safety IEC/EN62040-1
EMC IEC/EN62040-2
Operating temperature 0-40ºC
Relative Humidity 0-90%(non-condensing)
Altitude <1500m. when >1500m, derating
Noise Level <55dB@ 1Meter
Smart RS-232/USB(Preferential)

External Modbus/SNMP card supported by RS232,
Software supports Windows Family, Linux

Intelligent Slot SNMP (standard or mini) ,Modbus card, Relay card